OPUS

Condenser Water: PVC Pipe

Together with chilled water systems, condenser water systems are used remove heat energy from a...
Read more...

Polyvinyl Chloride (PVC) piping is the most widely used plastic piping material. It is available...
Read more...

Benefit of Material to Systems Application

There is more footage of PVC piping used in the world today than any other piping material mainly due to its durability, safety, ease of installation, cost-effectiveness and environmental soundness.  For these reasons, PVC condenser water piping is an approved material in many commercial and industrial air conditioning systems.

PVC piping has been in use for over 70 years. In North American and Europe there have been several Life Cycle Analysis studies done that have shown that PVC piping compared to other piping materials have a much lighter impact on the environment. PVC piping systems are recognized as acceptable for use in condenser water systems in all major model plumbing codes.

System Application and Material Usage

For condenser water applications solid walled pipe either Schedule 40, 80 or constant pressure rated [(Standard Dimensional Ration (SDR)] is used. Pipe diameters are available from 2” to 24” and in 10 or 20 foot lengths. Pipe ends are either plain end, belled or grooved. The grooved-end pipe is joined by using an elastomeric coupling. 

If the piping is used in outdoor environments, it is advisable to protect the pipe from the sun’s rays with an approved shield. The most commonly used protection is a coat of water-based latex paint.

For most condenser water applications solvent cementing is used almost exclusively. Cemented joints are easy and safe to make requiring no expensive or special tools. The joint if made properly is stronger than the pipe or fitting.

To ensure a leak-free system, completely follow the manufacturer’s joining and installation instructions. In testing any PVC piping systems, test hydrostatically—DO NOT TEST WITH AIR. 

Other alternate condenser water piping materials are steel, cast iron and copper. If conditions of service allow the usage of PVC piping material, it likely would be the most cost-effective of any piping material. For more information visit the PPFA Website.

Manufacturers and Suppliers Participating in OPUS

ANVIL International

Anvil International offers a full line of domestically-produced iron fittings, steel nipples,......
(click for details)

Embassy Group LTD

Embassy Group LTD is a 100-percent member owned, 3.2 billion dollar corporation consisting of......
(click for details)

EVAPCO, Inc.

EVAPCO, Inc. is a worldwide manufacturer of cooling towers, closed circuit coolers, evaporative......
(click for details)

F.W. Webb Company

F.W. Webb Company is a multi-faceted distributor of plumbing and heating, HVAC and controls,......
(click for details)

Ferguson

Ferguson specializes in providing PVF, Plumbing, HVAC and Related Specialty Products and......
(click for details)

Galloup Company

J.O. Galloup Company is a premier distributor of commercial and industrial piping products,......
(click for details)

MORSCO

MORSCO is a leading U.S. distributor of commercial and residential plumbing, HVAC, and PVF, with......
(click for details)

Tyco Mechanical Products

Grinnell Mechanical Products, a leading brand of Tyco International Company, manufactures a wide......
(click for details)

Victaulic

Victaulic is the world's leading manufacturer of mechanical pipe joining products. For over 80......
(click for details)

Weldbend Corporation

Weldbend Corporation is a manufacturer of carbon steel welding fittings and forged steel......
(click for details)